[ceaser]

Hi

The complete suit consists of 7 different programs:

1. Main Program - opening jobs, importing data, exporting data, etc. This program also calls the other programs. I had to split it up, as NSBasic could not handle all the coding in one program.
2. Data - here you enter all your design info: horizontal alignment, vertical alignment, crossfalls, widths, Tin Model, Coordinates, etc.
3. Field - this is used in the field connected to either a Engineering Level, Total Station or GPS to setout profile pegs, coordinates, batterboards, layer checks,etc.
4. COGO - here you can do calculations like Joins, Polars, Intersections, Area By coordinates, Arc calcs, etc
5. Map - here I have used Franson Tools to load up a map and sync it to a GPS.

I have not counted all the line coding, but it is close to about 30 000 lines.

I am attaching the coding for the COGO.

Thanks
Michael
6. CAD - busy with it using B4PPC!
7. Stock - used in the field to measure stockpile\pit volumes using a Total Station or GPS