Measuring distance on move

RandomCoder · #11 (**permalink**) 07-02-2007, 01:02 PM

No, only cGray will work with B4PPC.

Regards,
RandomCoder

Cableguy · #12 (**permalink**) 07-02-2007, 01:04 PM

If you must use cgrey then add to globals:
cGrey=cGray

JJM · #13 (**permalink**) 07-03-2007, 02:59 PM

Hi John,

You have only to change gGrey by cGray and after all is OK.
If you want you can change cGrey by cRed or cBlue ...

Bye
JJ M

Agrartec · #14 (**permalink**) 07-03-2007, 05:44 PM

Thanks for your help, but this problem I could solve by myself. It just wondered me that BerndB wrote "cgrey" in the code and Cableguy said "VB supports both spellings". So I was confused about the error.

@BerndB: Didn`t you test your version?

BerndB · #15 (**permalink**) 08-04-2007, 11:32 PM

Hi agratec,

I was busy last time, so I didn't join the forum...

I use Version 5, and usually only work on PPC.
I did test the code, but it was only compiled on the PPC. Your errormessage you got on the PC?
As far as I remember the compiler ignored 'cgrey' - I didn't receive an error message - but the color was an other kind of gray than cGray.

I didn't notice it that time, and in principle the code worked - so I didn't worry about cGrey and cGray ....

Sorry for the confusion I produced

regards BerndB

jerryjukem · #16 (**permalink**) 08-28-2007, 01:43 AM

I tried your program but have a problem on the xutm. This constantly gives me the wrong number on the utm(1) from decimal lat.My lat is about 36 but get a number like 64568. Have you checked this? I am using a hp6515. Is it possible the gps data string is wrong? The y coordinate seems to be ok. Also, what is condition "A"?

Thanks